Two skid steer brush cutters, two skid steer skeleton grapples, and two skid steer buckets have been added to the product line-up.
V40 Rotary Brush Cutter - Standard Deck
The V40 Standard Deck Skid Steer Brush Cutter is designed to quickly clear and mulch brush and small trees up to 3” in diameter. The three-blade cutting system, mounted to a large flywheel ensuring the flywheel bounces off stumps rather than catching and damaging the motor.
This skid steer brush cutter also features:
- Standard dual hydraulic pressure relief valves with dynamic braking to stop the 150-215 lb flywheel in under 10 seconds.
- Direct drive Eaton® motor rated up to 25 GPM for usage on a wide variety of skid steers.
- Bracing along the top connected to a push bar at the front provides rigidity for pushing over thick brush and trees.
- ½” x 4” single side updraft blades for efficient cutting and mulching.
This brush cutter is available in 5 and 6' cut widths and has a recommended flow rate of 16-25 GPM.
Learn more about the V40 Standard Deck Rotary Brush Cutter.
V40 Rotary Brush Cutter - Open Front Deck
The V40 Open Front Deck Brush Cutter attachment is designed to rough-cut dense brush and trees up to 3” in diameter. The three-blade cutting system, mounted to a flywheel ensures the flywheel bounces off stumps rather than catching and damaging the motor. The cutter quickly mows trees and stumps down to the ground to limit regrowth.
This skid steer brush cutter also features:
- Standard dual hydraulic pressure relief valves with dynamic braking to stop the 150-215 lb. flywheel in under 10 seconds.
- Direct drive Eaton® motor rated up to 25 GPM for usage on a wide variety of skid steers.
- Tall push bar at the front provides rigidity and helps push over thick brush and trees.
- ½” x 4” single side updraft blades for efficient cutting and mulching.
This brush cutter is available in 5 and 6' cut widths and has a recommended flow rate of 16-25 GPM.
Learn more about the V40 Open Front Deck Rotary Brush Cutter.
V40 Skeleton Grapple
The V40 Skeleton Grapple is a two-cylinder independent grapple with an open sided design made for hauling brush and logs. Oddly shaped items (like rocks, logs or piles of concrete), can be moved more easily and efficiently with this grapple. The open “skeleton” bottom allows dirt and smaller unwanted material to fall between the 8″ tine spacing.
Every other tine is constructed of one piece of steel, from tip to top brace, to add rigidity. Also, a cross member (or front comb) spans across the bottom tines of the grapple to increase overall strength.
This skid steer grapple is available in 66-84” widths. Optional Cylinder Guards are available to protect the cylinders from debris and increase uptime.
Learn more about the V40 Skeleton Grapple.
V40 Skeleton Rock Grapple
The V40 Skeleton Rock Grapple attachment is a two-cylinder independent grapple designed to pick rocks while leaving dirt and debris behind. Oddly shaped items (like logs or piles of concrete), can be moved more easily and efficiently with this grapple.
The open “skeleton” bottom allows dirt and smaller unwanted material to fall through the 2.9″ tine spacing. The raised ridge in center of tines (rock dam) and notch near tips helps secure rocks while digging.
Every other tine is constructed of one piece of steel, from tip to top brace, to add rigidity. A cross member (or front comb) spans across the bottom tines of the grapple to increase overall strength. Also features fully gusseted tine tips to strengthen tines and limit bending.
This skid steer skeleton grapple is available in 66-84” widths. Optional Cylinder Guards are available to protect the cylinders from debris.
Learn more about the V40 Skeleton Rock Grapple.
V40 Skeleton Rock Bucket
The V40 Skeleton Rock Bucket attachment is designed to pick rocks while leaving dirt and debris behind. The open “skeleton” bottom and back allows dirt and smaller unwanted material to fall through the 2.9″ tine spacing. The raised ridge in center of tines (rock dam) and notch near tips helps secure rocks while digging.
Every other tine is constructed of one piece of steel, from tip to top brace, to add rigidity. A cross member (or front comb) spans across the bottom tines of the bucket to increase overall strength. Also features fully gusseted tine tips to strengthen tines and limit bending.
This skeleton rock bucket is available in 66-84” widths.
Learn more about the V40 Skeleton Rock Bucket.
V40 Low Profile Dirt Bucket
The V40 Low Profile Dirt Bucket has a low profile design and extended bottom for better visibility of the cutting edge. The shell and side plates are made from 3/16” grade 50 steel plate and the ½” x 3” structural wear bars underneath add rigidity and increase the life span.
An optional Bolt-on Edge and Serrated Edge can be added to the standard ¾” x 6” weld-on edge to extend the overall life of the bucket. Comes in five different models that are 5-7' wide and weigh 405-515 lbs.
Learn more about the V40 Low Profile Dirt Bucket.
1-YEAR WARRANTY
All Virnig products and components are backed by a one-year warranty. The skid steer attachments are built with a universal mount to fit most skid steer loaders including: Bobcat, Caterpillar, ASV, Case, Daewoo, Gehl, JCB, John Deere, Kubota, Mustang, New Holland, Takeuchi, Terex, Volvo, Wacker-Neuson, and others.
For more information visit virnigmfg.com or contact your local Virnig Dealer to discuss product and pricing information.
