A skid steer brush cutter with an open front is a great choice for clearing heavy undergrowth, saplings, dense grass, and weeds.
There are many different brush cutters that make quick work of clearing overgrown brush. Skid steer brush cutters are better suited to tackle large areas of extremely tough and dense brush with minimal impact on the property. They offer superior maneuverability compared to dozers, walk-behind cutters, and pull-behind mowers.
Choosing the best brush cutter for you depends on a number of factors, which we'll cover below. These include understanding the application, having experience, knowing the terrain, and finding a quality cutter that matches your skid steer’s flow rate.
Open front brush cutters are not like lawnmowers. They have powerful motors, thicker blades, and are primarily used to cut down thick brush, topple small trees, and make stumps disappear.
Buying a machine that isn’t strong enough to tackle whatever you’re clearing will be a frustrating waste of money.
If you have several acres to clear, an open front cutter on a skid steer is probably suitable. After all, nobody wants to clear four acres of brush with a walk-behind mower.
Experience. The 10-letter word that is vital to brush cutting success. Brush cutters look like they would be a fun attachment to use, but getting a job done efficiently isn’t all that easy or fun. And it can be dangerous, too.
Sitting in the driver’s seat for the first time can be overwhelming, and for good reason. There are a lot of controls to keep track of and objects to avoid when driving. Moving one control in the wrong direction can be disastrous! It takes time and finesse to become an operator as opposed to a driver. Regardless of what you do, be cautious and pay attention to your surroundings.
IMPORTANT TIP: If you'd like to learn more about these powerful attachments, check out our Ultimate Guide to Brush Cutter Attachments.
Avoid using skid steer brush cutters on steep terrain. Steep terrain can come up quickly if you're not paying attention. If you are working on unfamiliar terrain, take a moment to walk around and see if there are any sudden drop-offs or soft, mushy areas. Also, look for rocks, wire, and other damaging debris before cutting.
IMPORTANT TIP: Brush cutters are very heavy. Cutting on wet ground can cause a skid steer to lose traction and sink deep into the ground. Traction can be increased by using a machine with tracks instead of tires.
The model you purchase needs to have the required structural strength and quality components to withstand the stress that comes with this type of work. A heavy-duty, high quality open front mower will eliminate extremely dense brush and will cut 4 to 6" diameter trees down to the ground in seconds.
There are several important things to look for when purchasing a new or used skid steer mower.
An open front skid steer mower with these features will be a high-quality, well-designed piece of heavy equipment.
Virnig’s attachments fulfill all eight of the above criteria. You can be sure you’re getting a high-quality brush cutter when you get yours from Virnig.
Quality Spindle: The spindle is the most expensive and important performance part of a skid steer brush cutter attachment. Choosing a cutter with a thick, high-quality spindle is an absolute must when making a brush cutter purchase. All of Virnig’s open front brush cutter attachments are made with thick, high-quality USA made spindles. |
Reinforced Mower Deck: Take a close look at the steel reinforcements on the top of and under the mower deck — it has to be reinforced since it is the support structure for the entire mower. Like Virnig’s, the mower deck should be constructed with thick, high-grade steel and cross members running across the entire length. |
Heavy-duty Flywheel: A heavy-duty flywheel is needed for handling large debris. If it is too light the brush cutter will bog down and hurt performance. A heavier flywheel will create more inertia and provide a cleaner, more precise cut. Depending on the model, your Virnig flywheel will be between 150 and 550 lbs with a rounded edge to prevent catching on debris and causing damage. |
Reinforced, Tall Push Bar: If your cutter needs to go through a lot of small trees and thick debris then a push bar is essential. Without a push bar, the steel on the front deck may quickly deform and affect the brush mower’s performance. Virnig’s open front attachments all come with push bars that will protect your cutter and extend its longevity. |
Hydraulic Pressure Relief Valves: Pressure relief valves protect the motor and the loader’s hydraulic system from pressure spikes. When the blades hit a large stump or rock, the relief valves open and relieve the pressure. This protects seals and other internal components from damage due to excessive pressure. Virnig’s premium drive components include Eaton® motors with relief valves to provide optimum performance and longevity. |
Replaceable Blades: Replaceable blades minimize downtime. Rocks, dirt, and other obstructions will dramatically increase the dulling of the blades. They will eventually need to be replaced. Virnig’s attachments come with replaceable blades so you can easily extend the life of your cutter. |
Replaceable Skid Shoes: Similar to the blades above, skid shoes need replacing from time to time as well. Skid shoes increase the mower deck’s wear life and add protection. Skid shoes help the skid steer mower glide over soft, uneven terrain instead of gouging into the ground. Virnig makes maintenance easy by ensuring that ordering and replacing your skid shoes is simple. |
Safety Features: A skid steer brush cutter motor that features dynamic braking will safely stop the flywheel in about ten seconds. The brush cutter attachment should also have a safety feature that prevents the cutter’s deck from going above the cab door. This keeps the cutter close to the ground and limits flying debris, which helps protect the operator. All of Virnig’s attachments offer these crucial safety features. |
Effective mowing always requires a suitable machine. With so many options to choose from, it’s important to match the brush cutter to the overall skid steer width, as well as the flow rate capabilities of your skid steer’s hydraulic system.
A common question is: What attachment width should I purchase? Purchase a brush cutter with a cut width that is wider than the tires or tracks of your skid steer. If the cut width does not cover the tracks, then you increase the risk of running over uncut debris; debris that could damage your skid steer tires.
Bigger is not always better. Selecting a brush cutter attachment that is too wide will:
And each of these factors directly impacts performance.
You must know the flow rate of your skid steer and the minimum and maximum flow rate of the brush cutter's motor. Flow rate is typically listed in gallons per minute (GPM).
IMPORTANT TIP: To achieve optimal performance, the brush cutter’s flow rate should fall within the min/max range of the brush cutter motor.
Flow rate examples:
Another factor to consider is the operating lift capacity of your skid steer loader. Brush cutters generally weigh about 2,000 pounds. Always check the attachment’s recommended loader capacity to make sure your skid steer has the necessary operating capacity to effectively handle the skid steer brush mower.
When it comes to tools for taking on overgrown brush, it's easy to get swept up in a bit of confusion over what things are called. Are you looking for a brush cutter, brush hog, or brush mower? For some, these terms are used interchangeably, and for others, they have different meanings. It can all depend on who you're talking to.
A skid steer brush hog is a rotary mower attachment, and they come in all different sizes. A skid steer brush cutter is also a rotary mower attachment. And a skid steer brush mower? You guessed it. It's a rotary mower attachment.
Here at Virnig Manufacturing, we've named our rotary mower attachments brush cutters, but it's okay if people refer to them as brush hogs or brush mowers. The most important thing is that they're able to get their hands on the right tool for the job and operate it safely and efficiently.
For maximum safety, take the time to read and understand a brush cutter’s manual before operating. The main thing is to keep bystanders at least 200 feet away from the cutter when it is being operated. Also, pay attention when mowing to make sure the front of the deck isn’t plowing into the ground.
Here are some general tips to safely operate skid steer brush cutter attachments:
Whether you buy a new or used skid steer mower, always keep up with regularly scheduled maintenance and replace worn or defective parts as soon as they are detected.
Brush cutters require very little maintenance besides grease and oil. It is helpful to keep an eye on wear parts like the blades and skid shoes. Brush cutters have areas that must be greased and the motor oil needs to be checked regularly and filled with the proper oil.
IMPORTANT TIP: Keep the cutter's spindle well lubricated at all times. We receive many cases of part failure that could have easily been prevented with proper lubrication.
Make sure to take great care of your skid steer brush cutter attachment. Use the cutter’s manual for maintenance information and stick to a schedule. You can count on years of reliable performance if it is well maintained.
THE RIGHT EQUIPMENT
Clearing brush can be very tiring, but having the right equipment will make it a lot easier. If there are several brush clearing jobs ahead of you, one of the best attachments you can own is a skid steer brush cutter.
Don't just take our word for it. See what brush cutter owners had to say about their brush cutters.
"I thought I would have buyers remorse when I was making this purchase, but after getting it home I couldn’t be any happier! I am a home owner with about 20 acres of overgrown woods. I used it a few times in a small area just to get the feel for it.
I spent about 5 hours in the skid steer with it so far. I was pleasantly surprised with the performance. I have been cutting everything from grass to small trees up to 3 inches in diameter. If I had to do it again I wouldn’t hesitate for a minute!"
-Melvin P.
"Amazing customer support and response! In addition to the 78″ Brush Mower, I own an 84″ Skeleton Grapple, 84″ Land Leveler, 30″ U Blade Tree Scoop and a set of forks, all Virnig and performing admirably. If I ever decide on any future attachments, I will definitely go with Virnig!"
- Gary O.
"I’m in the commercial brush cutting business. We have 2 Virnig floating deck closed front mowers and the quality, durability, and design are the best I have found in the marketplace."
- J McCarthy LLC
"Bought this V60 rotary mower last year and finally got to put some time on it. It’s truly amazing what this cutter will go through. Works fine on grass and tall weeds, but you really get to see what 41 gpm will do in thick brush and cedar.
This thing went well above and beyond my expectations. With the right machine, this cutter is unstoppable. Glad I made this purchase. It definitely complements our land clearing business."
- John
If interested in buying a new brush cutter, check out what we have to offer.